Water Heater Problems: Water Heater Repair and Troubleshooting

Are you looking for troubleshooting your water heater problems or water heater repair tips? Normally, water heater problems are very self-evident, so you quickly know when there’s an issue with your water heater. For example, hot water faucets that don’t give you hot water, a leaking tank or puddles near the water heater or strange sounds coming out of your water heater are common issues. waterheater

It helps to know how to solve basic issues yourself, but make sure to contact a water heater repair professional for more complicated problems.
Some of the most common water heater problems are leaking tanks, not getting enough hot water, water that comes out not hot enough or too hot, smelly or discolored water and strange noises.

Water Too Hot or Not Enough Hot Water
Both of these problems are very common with water heaters. Either they provide water that is too hot or not hot enough. If you are experiencing this issue, the first step is for you to adjust the temperature dial on the front of the water heater. Give it a couple of hours, and then check the water temperature by opening a faucet. If adjusting the temperature dial doesn’t fix the issue, try the water heater troubleshooting methods outlined below.
Water Too Hot

The first thing you must do if your hot water is coming out way too hot is to turn down the temperature on the water heater’s thermostat dial. Make a note of the current setting by writing it down or marking it with a felt-tip pen, and turn the thermostat down. Wait a couple of hours and check the temperature again. If the water still comes out boiling, contact a water heater repair professional.
Not Enough Hot Water

As well as checking and adjusting the thermostat settings, check to make sure your water heater tank isn’t leaking. To check for leaks, look around the base for any signs of water. If the temperature settings are fine and there are no leaks, you will need to flush the water heater tank so that any mineral deposits can be cleared out. These mineral deposits reduce the heater’s efficiency, making you have to crank up the temperature and use more energy.
If you have adjusted, checked and flushed your water heater, the problem may be the dip tube. This tube supplies cold water to the tank, and it’s possible the tube is cracked or broken. This plastic tube should direct the cold water to the bottom of your water heater, but if it splits or breaks, the cold water is poured at the top of the tank and mixes with hot water coming out of your pipes. If your dip tube is broken, contact a water heater repair professional to get it fixed.tankless-water-heater

Water is Discoloured or Smells Bad
If you notice your water has a strange smell, test if the problem is in the water heater or the source water. If both hot and cold water has the same odor, or if the smell is just in the cold water, most likely the problem is the source of water. To resolve this issue, it’s a good idea to install a water softener or a whole house water filter.
Water Heater Makes a Boiling Sound
If your water heater is making a boiling sound as if the water is boiling inside the tank, it’s a sign of overheating. This causes a pressure buildup which can be very dangerous, so it’s imperative that you call a water heater repair professional Plumber as quickly as possible.